RHEINZINK® - Angled Standing Seam
 |
|
RHEINZINK® - Angled Standing Seam
- A vibrant, elegant structure even for large surfaces.
- Feasible with tapered surfaces as well as concave and convex rounded surfaces.
- Prominent optical structuring of the roof surface with a ca. 12 mm seam width.
- Simple, efficient installation by closing just one seam
- Rainproof lengthwise connection
- Use of prefabricated panels or sections
- Panel lengths up to 16.0 m are possible
|
|
|
RHEINZINK® - Angled Standing Seam
In the realm of sheet metal technology, the angled standing seam is a relatively new development: it has only received mention in technical literature since the beginning of the 20th Century. For roofs with a pitch of at least 25°, it constitutes the norm. Compared to the double lock standing seam, seam closure of prefabricated sections is particularly easy, as the finished angled standing seam is created by only seaming one side. The angled standing seam is preferred in visible areas, where the pitch of metal roofing is higher, e.g. parapets, attics and mansard roofs; whether in traditional vertical, diagonal or horizontal application. Although it appears wider than the double standing seam, the angled standing seam still offers prominent vitality and quite a slender effect to the structure of large surfaces. |
|
|
|
|
